ASSEMBLY
ATTACHING THE SEAT
5) • Make sure the seat fabric is properly
attached to the seat support bar. If the
seat fabric is unzipped, wrap the seat
fabric around the seat support bar (Fig.
5a) and zip the fabric closed.
• Attach the seat by lining up the seat
anchors on the side of the seat with the
anchors on the stroller frame and push
them together until they click securely
(Fig. 5b). The seat can face in either
direction, front or backwards.
TO ADJUST SEAT
6) • The seat can be adjusted into upright,
reclined, and carriage positions. Pull the
recline button on the rear of the seat and
rotate the seat into the desired position
(Fig. 6a).
• Upright and Reclined Position: Buckle
the footrest straps on the rear of the
seat. Pull the excess straps to tighten
the seat (Fig. 6b).
7
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
• To recline the seat, loosen the head strap
through the buckle and adjust to the
required recline position (Fig. 6c).
• To place the seat back in a more upright
position, press upward on the seat
back with one hand while pulling the
head strap through the buckle with
the other (Fig. 6d). The strap will lock
Fig. 5a
automatically.
The upright position should be
used only for a child that is at least
6 months old. Always re-adjust
the safety harness, including the
shoulder belts, when repositioning
the seatback.
• Carriage Position: Make sure both
footrest and headrest straps are
Fig. 5b
loosened and extend the seat surround
fully (Fig. 6b).
REMOVABLE CANOPY
7) • To attach the removable canopy: Snap
the canopy clips on the inside of the
toddler seat tubes (Fig. 7a).
• To open the canopy: push forward on
Fig. 6a
the front edge of the canopy while holding
the rear of canopy in place (Fig. 7b).
• To fold the canopy: pull backwards on
the front edge (Fig. 7b).
Fig. 6b
Copyright © 2017, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
ASSEMBLY
Fig. 6c
Fig. 6d
Fig. 7a
Fig. 7b
8