Dovre ROCK 350 Installation Et Mode D'emploi page 81

If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove removable parts (fire-resistant inner
plates, fire grate, top plate, ashtray) from the
appliance before starting installation.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
1. Remove the appliance from the pallet (4) by
removing the bolts (1).
2. Remove the mounting brackets (2) by turning the
adjustable feet (3) out.
3. Reassemble the adjustable feet (3).
Subject to change because of technical improvements
4. Open the door; see the following figure:
5. Remove the fire-resistant inner plates; see the
following figure:
1
a. Lift up the baffle plate (6) on the left side.
2
b. Remove the inner plate (4).
c. Lift up the baffle plate (6) on the right side.
3
d. Remove the inner plate (5).
4
e. Remove the baffle plate (6).
f. Remove inner plates 1, 2 and 3.
09-20021-151
g. Remove the fire basket (8).
h. Remove the ash removal port (11).
i. Remove the grates (9) and (7).
j. Remove the ash pan (10).
1
09-20021-156
Vermiculite inner plates are light and tend
to be ochrous in colour on delivery. They
insulate the combustion chamber to boost
combustion.
09-20021-152
11