Beyerdynamic MCE 86 Information De Produit page 9

caused by electronic view finders.
All battery powered microphones have a switch and an LED indi-
cating the battery state. The life of a battery is around 80 hours.
Battery powered
MCE 86 S and MCE 87 S
When using a battery keep the microphone switch in the "On"
position and not in the "B.C." (Battery Check) position. The
microphone is working, but the power consumption is
increased and feedback can occur.
MCE 87 S
Do not use phantom power with the MCE 87 S; this microphone
is only designed for battery powering.
The MWK N(C)-K2 connecting cable is equipped with a 3.5 mm
mono jack plug for camcorders. If only one sound channel is
recorded on a stereo camcorder, the mono jack plug should be
replaced by a stereo plug. Please contact your beyerdynamic
dealer.
Phantom powered
MCE 86 S
When using phantom power, the B.C. switch position does not
work. Do not operate in the "B.C." (Battery Check) position.
MCE 87
When using the MCE 87 with a beltpack transmitter and the
TPK 170 N(C)F cable, pin 4 of the Lemo connector is positive
power.
MCE 87 VS
The 3.5 mm stereo jack plug is wired for mono recording.
Service
Servicing must be carried out by qualified service
personnel only. Dismantling the microphone yourself will
render the guarantee null and void.
9