Installation
Instructions
WARNING
these instructions.
The pressure regulator and the burner orifices are
WARNING
Do not operate the cooktop before
TOOLS YOU WILL NEED FOR
CONVERSION
1
CONVERT THE REGULATOR
31-11130
Explosion Hazard
Conversion to Propane (LP) or Natural Gas
1
CONVERT THE REGULATOR (Cont.)
it back into the
into position.
back onto the
regulator and
tighten.
2
CHANGE BURNER ORIFICES
INSTALLATION TIP:
possibility that some may not be replaced.
heads.
top burner
orifices using
small pliers
to carefully
lift out the
orifices.
beside the center of the burner.
Gasket
Cap
LP
NAT
LP
NAT
position
caps
head
igniter
igniter
Orifice
Orifice
NAT
LP
NAT
retainer
LP
position
cap
head