Maintenance And Cleaning; Disposal - Conrad Electronic FSP400-60GLC Notice D'emploi

10. Maintenance and Cleaning

There are no serviceable parts in the ATX power supply unit, this is why you should never
open it. Any maintenance or repair and the ensuing opening of the ATX power supply unit
may only be carried out by an expert or a specialist workshop.
The fuse which is built in the ATX power supply unit is only to be replaced with a special
tool. This is why you should not try to replace the fuse yourself, leave this to an expert or
a specialised workshop.
Due to the fan that is built into the ATX power supply unit, the computer will suck in more or less dust
in the course of time, depending on the installation site, which will settle inside the power supply unit
and on the fan blades. This dust can be removed with a vacuum cleaner from outside.
Separate the ATX power supply unit from the mains voltage beforehand, pull the mains
plug!
To clean the outside of the ATX power supply unit, a dry, soft and clean cloth is sufficient.

11. Disposal

At the end of its service life, dispose of the product according to the relevant statutory
regulations.
32
All manuals and user guides at all-guides.com