Conrad Electronic FSP400-60GLC Notice D'emploi page 38

Warning!
Do make absolutely sure to use the correct 4-pin plug.
With the 400W version the 4-pin plug with the two yellow/black cables is to be used (plug
labelled "P3").
With the 550W version the 4-pin plug with the two yellow/green cables is to be used (plug
labelled "P3").
If the wrong plug is used, the mainboard and also the power supply unit will get destroyed,
loss of guarantee/warrantee!
• For mainboards with 20-pin ATX plug, the 4-pin separable plug is to be separated from the 24-
pin ATX mains plug, to do this, simply slide it out. The 4-pin separable plug can not be used for
other connections, simply leave it hanging on the side of the cable or secure it with a cable
fastener.
38
All manuals and user guides at all-guides.com