ENGLISH
the bolt before applying force. This will prevent the head of the socket
bolt from turning.
MOVING AND ADJUSTING
Moving
CAUTION!
Store the tool in a dry place, out of the reach of children.
Make sure that the tool is stable and safe so that it cannot fall on
children or animals.
Raise the rear stabiliser until the front stabiliser wheels touch the
ground. With the wheels on the ground, the machine can easily be
moved to the desired location. NOTE: The seat slides when the machine
is in the upright position.
NOTE!
The seat slides when the machine is in the upright position.
Adjusting the pedal
The pedal strap is adjustable and can be adjusted to the size of the
user's foot.
Shelf support adjustment
The shelf support is adjustable so that you can always train in the best
position.
FILLING AND EMPTYING THE WATER TANK
CAUTION!
•
Always fill the tank with tap water only and add a water
purification tablet. Never use chlorinated water or chlorine.
This can damage the tank and void the warranty.
•
Add a water purification tablet once every six months. If the
water remains cloudy, replace the water in the tank.
•
The water in the tank is not consumable. Discard the water
after it has been pumped out of the tank.
C
O
PUMPING
ADD WATER
WITH FUNNEL
Filling the water tank
•
Remove the water tank cap (O) from the top water tank
opening. The water tank can be filled in two ways.
•
Manual water pump (C): Insert the hose end of the manual
water pump (C) into the bucket filled with water and insert the
other end of the hose into the water tank opening. Press the
hand water pump to fill the water tank.
•
Funnel (D): Insert the funnel (D) into the opening of the water
tank and pour a bucket full of water through the funnel into the
water tank.
•
Look at the side of the water tank to see what the water level
is in the tank.
•
Replace the water tank closing cap (O) on the opening of the
water tank, so that it is properly closed.
Empty the water tank
•
Remove the water tank closure cap (O) from the top water tank
opening.
•
Place an empty bucket next to the water tank and insert the
end of the manual water pump hose (C) into the empty bucket.
Insert the other end of the hose into the opening of the water
tank. Squeeze the hand water pump to empty the water tank.
•
When the water tank is empty, dry it with a cloth.
•
Replace the water tank cap (O) on the water tank opening so
that it is properly sealed.
TRAINING WITH FITNESS APPLICATIONS
VirtuFit does not provide service for third party fitness applications
such as Kinomap, iConsole, FitShow etc. If you encounter problems
with a third party fitness application, please contact the developer
of the application in question.
D
ADD WATER
WITH WATER PUMP
C
14