Moving And Adjusting; Training With Heart Rate; Training With Fitness Applications - virtufit TR-50i Manuel

ENGLISH
Hex head bolts: Make sure that the hex head spanner is pushed into
the bolt before applying force. This will prevent the head of the socket
bolt from turning.

MOVING AND ADJUSTING

Moving and storage
CAUTION!
Store the tool in a dry place, out of the reach of children.
Make sure that the tool is stable and safe so that it cannot fall on
children or animals.
• Pull the pin on the handlebar of the console to fold the unit.
INKLAP INSTRUCTIES
• Do not pinch the cables.
• Place the treadmill against a wall or store it under a bed or closet.
FOLDING INSTRUCTIONS
FOLDING INSTRUCTIONS
FOLDING INSTRUCTIONS
INKLAP INSTRUCTIES
INKLAP INSTRUCTIES
INKLAP INSTRUCTIES
NOTE:
-- Pull the pull-pin on the console handrail to fold the console carefully.
OTE: Store your machine in a dry area away from children and high tra c areas as shown in the
Store your machine in a dry area away from children and high tra c areas as shown in the
NOTE:
Store your machine in a dry area away from children and high tra c areas as shown in the
-- Pay attention to the cables and ensure that they are nog pinced.
Adjusting the treadmill
illustration. Be sure it is secure and cannot fall onto small animals or children. --unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
stration. Be sure it is secure and cannot fall onto small animals or children.
illustration. Be sure it is secure and cannot fall onto small animals or children.
--Place the machine leaning against the wall or place under a bed.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
1. The treadmill veers to the left: Turn on the treadmill, set the
speed to 2 to 3 km/h without forcing. Use the Allen key to turn
the screw on the left side of the end of the treadmill a quarter
turn to the right (1). Run the treadmill for 1 to 2 minutes without a
load. Repeat the process until the treadmill is exactly in the
middle.
2. The treadmill turns to the right: start the treadmill, set the
speed to 2 to 3 km/h without a load on the treadmill. Using the
hexagonal key, turn the screw on the right side of the end of the
1. Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and
-- Pull the pull-pin on the console handrail to fold the console carefully.
1. Pull the pull-pin on the console handrail to fold the console carefully. Pay attention to the cables and -- Pull the pull-pin on the console handrail to fold the console carefully.
treadmill a quarter turn to the right (2). Run the treadmill for 1 to
-- Pull the pull-pin on the console handrail to fold the console carefully.
-- Pay attention to the cables and ensure that they are nog pinced.
-- Pay attention to the cables and ensure that they are nog pinced.
ensure that they are nog pinced.
ensure that they are nog pinced. -- Pay attention to the cables and ensure that they are nog pinced.
ensure that they are nog pinced.
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
2 minutes without a load.
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
--unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up
2. Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
--Place the machine leaning against the wall or place under a bed.
--Place the machine leaning against the wall or place under a bed.
2. Unscrew the hand knob on the both sides of the frame respectively and carefully fold the console up.
--Place the machine leaning against the wall or place under a bed.
3. The treadmill has jammed: Use the Allen spanner to turn the
3. Place the machine leaning against the wall or place under a bed.
Place the machine leaning against the wall or place under a bed.
3. Place the machine leaning against the wall or place under a bed.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
CAUTION: Do not allow children to touch the machine, the treadmill may fall.
screw on the right side of the end half a turn to the right and
11
the screw on the left side of the end half a turn to the right as
RUNNING BELT ADJUSTMENT
RUNNING BELT ADJUSTMENT
RUNNING BELT ADJUSTMENT
well. Repeat the process until the blockage is resolved (3).
01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
01. Running belt deviates to left: Start the machine, set speed at 2-3 km/h without a load on the belt,
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
e Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
use Allen key to turn the screw 1/4 turn (see fig. 1). Then allow the machine to run without a load for 1-2
minutes. Repeat process until the belt becomes central.
nutes. Repeat process until the belt becomes central.
minutes. Repeat process until the belt becomes central.
02. Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
02. Running belt deviate to right: Start the machine, set speed at 2-3 km/h without a load on the belt,
NL

TRAINING WITH HEART RATE

Hand sensors
This VirtuFit fitness machine is equipped with hand sensors to measure
heart rate. The hand sensors are attached to the handle and only work
if both sensors are held for a long time. For optimal performance, it
is important that the hands are slightly damp and exert constant
pressure on the sensors. Hands that are too dry or too wet may result
in abnormal readings.
CAUTION!
Never use the hand sensors in combination with a
wireless device to avoid interference.

TRAINING WITH FITNESS APPLICATIONS

VirtuFit does not provide service for third party fitness applications
such as Kinomap, iConsole, FitShow etc. If you encounter problems
with a third party fitness application, please contact the developer
of the application in question.
Instruction
• To scan the QR code with an Android or IOS phone or tablet, a
QR code scanner is required. The app for scanning QR codes can
be downloaded from the App Store or Google Play Store.
• Scan one of the QR codes below to go directly to the App Store or
Google Play Store page where the fitness app can be
downloaded.
• Scan the QR code on the right to access the fitness app
manual. The manual describes step by step how to connect the
fitness app to the device, how the fitness app works and what its
capabilities are.
Fitshow
APP STORE GOOGLE PLAY MANUAL
11