Télécharger Imprimer la page

Soundcore Sport X10 Mode D'emploi page 7

Publicité

1. Place the earbuds in the charging case and leave the case open.
2. Press and hold the button on the charging case for 10 seconds until the LED
indicators on the case flash white 3 times and then flash in sequence. This
confirms that the reset was successful and your earbuds can be connected
normally.
Specifications
Specifications are subject to change without notice.
Input
Rated output power
Battery capacity
Charging time
Playtime
(varies by volume level and content)
Driver size
Frequency response
Impedance
Waterproof level
Bluetooth version
Bluetooth range
1
2
10s
×3
5 V
0.5 A
5 mW (@1% THD)
55 mAh x 2 (earbuds);
540 mAh (charging case)
2 hours
Up to 8 hours
(Total 32 hours with the charging case)
10 mm x 2
20 Hz - 20 kHz
32 Ω
IPX7(earbuds)
5.2
10 m / 33 ft
05 EN

Publicité

loading