Publicité
Les langues disponibles
Les langues disponibles
6. Maintenance
The pump hose and motor are consumables and have to be maintained and changed regularly.
Pump hose: The pump hose has a lifetime of approx. 3 million compressions and after this, it must
be replaced. If the pump is operated continuously, the hose should be changed every 3 – 4
months. We recommend using only an original Aqua Medic spare pump hose assembly which is
supplied complete with fittings.
Grease: Before the hose is installed, it has to be greased. The pump will only operate properly if
the hose is effectively greased. Please only grease the hose, not the housing.
Motor: During continuous operation, the motor may heat up as high as 70°C. This is normal and
has no effect on performance or life. However, too little grease on the pump hose may cause
malfunction of the motor and overheating.
Drive wheel with rollers: The plastic drive wheel and the rollers are designed for a long life.
Nevertheless, it may become necessary to change the assembly which could be done the following
way:
Remove the pump hose by pushing the fittings out of the housing. The drive wheel can now be
pulled off the shaft as it is a pressed fitting.
Motor: The motor has a lifetime of >10,000 hours. To replace the motor, remove the drive wheel
assembly. Undo the 4 screws of the front of the pump. Now, remove the pump housing. Undo the
power cable connection from the connector block and remove the 2 screws securing the motor to
the housing.
To fit the new motor, reverse the above process.
Safety instructions
The pump may only be used indoors. Before undertaking any work on the pump,
disconnect the power plug from the mains.
7. Warranty
Should any defect in material or workmanship be found within 12 months of the date of purchase
AB Aqua Medic GmbH undertakes to repair or, at our option, replace the defective part free of
charge – always provided the product has been installed correctly, is used for the purpose that was
intended by us, is used in accordance with the operating instructions and is returned to us carriage
paid. The warranty term is not applicable on the all consumable products.
Proof of Purchase is required by presentation of an original invoice or receipt indicating the dealer's
name, the model number and date of purchase, or a Guarantee Card if appropriate. This warranty
may not apply if any model or production number has been altered, deleted or removed,
unauthorised persons or organisations have executed repairs, modifications or alterations, or
damage is caused by accident, misuse or neglect.
We regret we are unable to accept any liability for any consequential loss.
Please note that the product is not defective under the terms of this warranty where the product,
or any of its component parts, was not originally designed and / or manufactured for the market in
which it is used.
These statements do not affect your statutory rights as a customer.
If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be
defective please contact your dealer in the first instance.
Before calling your dealer please ensure you have read and understood the operating instructions.
If you have any questions your dealer cannot answer please contact us
Our policy is one of continual technical improvement and we reserve the right to modify and adjust
the specification of our products without prior notification.
AB AQUA MEDIC GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
14
-
Technical changes reserved – 03/2010
Publicité
