Kohler K-5414 Guide D'installation page 6

Strainer
Body
Drinking
Fountain
Tapered
Gasket
Wall
Bracket
3. Install the Strainer
Apply a bead of plumbers putty or other sealant around the
underside of the strainer body flange according to the
manufacturer's instructions.
Insert the strainer body into the fountain drain hole.
From the underside of the drinking fountain, slide the tapered
gasket onto the strainer body, making sure that the tapered side is
facing up.
Position the drinking fountain onto the wall bracket, and
assemble the friction washer, rubber gasket, and nut onto the
strainer body.
Tighten the nut securely. Remove any excess putty.
Apply thread sealant to the tailpiece threads, and install the
tailpiece to the nut. Tighten with a clean strap wrench.
Make your drain connections.
105128-2-AB
Apply plumbers
putty.
Friction
Washer
Rubber
Gasket
Nut
Tailpiece
6 Kohler Co.