AgfaPhoto DC8200 Manuel D'utilisation page 8

Photo mode
By default, the photo mode shows up first on powering on the camera.
Taking photos
1. Hold the camera steady and position your shot according to the image displayed on the screen.
2. Slightly press the Shutter button and wait for the camera to focus the object.
3. Place your object in the white frame showing up on the LCD screen.
4. When the frame turns green, press the Shutter button harder to capture the image. It takes then a few seconds to record
the photo on the memory card.
Note:
After each photo shot, the number displayed on the top right of the LCD screen indicates how many more photos you can
-
still take based on the current settings and the size of the memory card inserted in the camera.
When the camera memory is full, the LCD screen will display "Memory full" if you press Shutter button to take photos. To
-
continue photo shooting, you need to transfer all files of the memory card on your computer (as described below in the
section "Download photos and videos to your PC") or delete them to get more memory. Alternatively, you can insert a new
empty SD memory card.
This camera needs a SD card up to 32 GB to operate normally.
-
Digital zoom
You can enlarge the object up to 8 times with the digital zoom by pressing (T) button to zoom in the object and press the (W)
button to zoom out it. The icon
Note: When using this function, the camera will automatically adjust the lens so do not touch the lens while the camera is
focusing.
Shortcut buttons on the MENU dial
The camera has 4 shortcut buttons on the MENU dial made for quick access to the following settings: Flash (up button), Scene
(Left button), Self-timer (Down button) and Delete (Right button). By pressing one of these buttons, you can directly access the
setting options of the corresponding function.
Flash
In low light conditions it is better to use the built-in flash. You can also use the flash to compensate for backlight conditions.
To set the flash:
will show up right on the LCD screen.