Publicité
Les langues disponibles
Les langues disponibles
Please refer to the below diagram for correct installation:
1.
Slide the battery cover below the camera to open the battery compartment and access the memory card slot.
2.
Insert the memory card by gently sliding it in the correct polarity direction and until it clicks
with the battery one).
3.
An SD icon shows up then on the LCD screen when you turn the camera on indicating you that the card has been well
installed and all files will be stored on it.
4.
Then close the battery cover and slide it to lock it in place.
5.
Make sure that the card is not locked, otherwise photos and videos you took will not be saved.
Note:
- The internal memory can only store a few photos for test purposes. It is recommended to download them on a computer
if you want to keep it, otherwise they could be lost when the camera automatically shuts down because its charge is low or
when you remove away the battery.
- If there is a photo stored in the internal memory when you insert a card into your camera, a "Copy to card" message will
show up on the LCD screen with "Yes" or "No" options. By selecting "Yes", the photo will be then copied to the card.
- Formatting will delete all data stored on the memory card including those which are protected.
- Do not remove the SD card during formatting as this may damage the card and render it unusable.
- When memory is full, download the files from the SD card to your PC or directly delete some photos and videos to free up
storage space.
(the card top should be flushed
Publicité
