Publicité
Les langues disponibles
Les langues disponibles
•
Do not use damaged, frayed or deteriorated hoses and fittings. Make certain there are no
cracks, splits or leaks in the hoses.
•
Use the quick connect system to attach the hoses to the tool and pump. Make certain the
spring-loaded retaining rings are fully engaged and the safety rings are tightly threaded
against the spring-loaded retaining rings to prevent the connectors from disengaging under
pressure.
•
When connecting hoses that have not been preloaded with hydraulic oil, make certain the
pump reservoir is not drained of oil during start-up.
•
Do not remove any labels. Replace any damaged label.
•
Do not handle pressurized hoses. Escaping oil under pressure can penetrate the skin,
causing serious injury. If oil is injected under the skin, see a doctor immediately.
•
Never pressurize uncoupled couplers. Only use hydraulic equipment in a coupled system.
•
Always wear eye protection when operating or performing maintenance on this tool.
•
Always wear head and hand protection and protective clothing when operating this tool.
FAILURE TO OBSERVE THE FOLLOWING WARNINGS COULD RESULT IN INJURY
Do NOT exceed Maximum Pressure. See Torque Chart with Tool. Damage May Occur.
WARNING
Do not use damaged, frayed or deteriorated hydraulic hoses
and fittings.
Always wear eye protection when operating or performing
maintenance on this tool.
Always wear ear protection when operating this tool.
Do not carry the tool by the hose.
25
Publicité
