FAAC KIT T-MODE Mode D'emploi page 23

10
10.1 CORRELATION BETWEEN ROLLER ROTATION DIRECTION AND TRAVEL-LIMIT ARROWS
Relevant
travel-limit
Internal
box
Left
motor
sleeve
10.2 CONFIGURATION WITH INTERNAL BOX (Fig.24 ref.A)
10.2.1 MOTOR ON LEFT OR RIGHT
Setting of closing limit switch: Press the descent key on the remote-control, and, using the limit switch adjustment tool (Fig.1
ref. ), turn the up-arrow adjustment screw, clockwise to increase roller shutter travel, or anti-clockwise to reduce travel.
Setting of opening limit switch: Press the rise key on the remote-control, and, using the limit switch adjustment tool (Fig.1 ref.
turn the down-arrow adjustment screw, clockwise to increase roller shutter travel, or anti-clockwise to reduce travel.
When you have finished the adjustments, run an opening/closing test to evaluate correct setting of the limit switches.
10.3 CONFIGURATION WITH EXTERNAL BOX (Fig.24 ref.B)
10.3.1 MOTOR ON LEFT OR RIGHT
Setting of closing limit switch: Press the descent key on the remote-control, and, using the limit switch adjustment tool (Fig.1
ref. ), turn the down-arrow adjustment screw, clockwise to increase roller shutter travel, or anti-clockwise to reduce travel.
Setting of opening limit switch: Press the rise key on the remote-control, and, using the limit switch adjustment tool (Fig.1 ref. ),
turn the up-arrow adjustment screw, clockwise to increase roller shutter travel, or anti-clockwise to reduce travel.
When you have finished the adjustments, run an opening/closing test to evaluate correct setting of the limit switches.
ADJUSTMENT OF THE LIMIT SWITCHES
Roller
rotation
direction
Limit switch
adjustment screw
Right
motor
A
sleeve
Relevant
travel-limit
Reference arrow
Left
motor
sleeve
11
Roller
rotation
direction
External
box
B
Fig. 23
Right
motor
sleeve
Fig. 24
),