Franklin Electric 225STS5D8C-0166 Manuel Du Propriétaire page 6

Equipment for Submersible Turbine Assembly
*Please see Mi2011 STS assembly manual for instructions on how to properly assemble a STS Submersible
Turbine Pump.
The minimum basic hand tools and equipment needed for submersible turbine assembly:
Assembly Fixture Kit 305386901
6 x 6 Collet Hammer 305385101
8 x 6/8 x 8 Collet Hammer 305385102
Allen Wrenches – SAE or Standard (preferably T-handle design)
5/32" is used for sand collar set screws
1/8" is used for motor coupling set screws
3/8" for STS upthrust adjustment
Combination wrench or socket and ratchet set
5/16" for cable guard screws
7/16" for 6" sub turbine bowl bolts
9/16" for 8" sub turbine bowl bolts
1-1/8" for upthrust bolt and lock nut (for 8" STS assembly)
Flat head or standard large screw driver
Ballpeen hammer
Dow Corning 111 Valve Lubricant & Sealant (food grade grease)
Loctite 243
Fine emery cloth or steel wool for de-burring purposes.
Optional tool available: 305471902 6" STS bowl bolt assembly tool
6