Publicité
INSERT THE BATTERIES
1. Turn to open the battery compartment on the bottom of the
model mounted there screw counterclockwise.
2. Connect the fully charged battery on the intended plug in the
battery compartment. Pay attention to the correct polarity.
3. Close the battery compartment cover and turn the screw clock-
wise firmly back.
4. Activate the model, slide the switch to „ON".
Note:
Charge the battery for the first time 4 hours, up from the second
time 2.5 hours.
GB // 14
Charging instructions: Attention!!!!
Important information about your rechargeable 7.2V NiMH Battery
pack. (See drawing)
1. The charging time for these 6V NiMH Battery pack is max. 2.5
hours, an overload damage it and shortens the life.
2. Let the charger and the battery during charging never unatten-
ded.
3. If the speed / performance of your RC model decreases or even
stops, immediately stop operation and charge the battery (Note
the charge time: point 1) again.
4. To maintain the performance of the battery, please charge the
battery only when it is empty.
Publicité
