other end of the ResMed AirSense™ 10 Original Power Adapter is
plugged in to the mains power outlet. Please note: The battery can
be charged regardless of whether or not the battery is switched ON
or OFF. If the battery is charging properly, the 4 green charge
indicator lights (3c) will flash, and will light up solid green once it is
fully charged.
Charging the battery with ResMed S9™ Original Power Adapter
(Please Note: ResMed S9™ Original Power Adapter is NOT included
with Pilot-24 Plus. It is provided with the ResMed S9™ PAP Device)
Plug the Connector Tip (D) into ResMed S9™ Original Power
Adapter. Plug the other end of the Connector Tip (D) into the
battery's CHARGE port. Ensure that the other end of the ResMed
S9™ Original Power Adapter is plugged in to the mains power outlet.
Please note: The battery can be charged regardless of whether or
not the battery is switched ON or OFF. If the battery is charging
properly, the 4 green charge indicator lights (3c) will flash, and will
light up solid green once it is fully charged.
B. Using with PAP Device as a portable battery
Please Note: For longer run times, please disconnect the heated
humidifier from the PAP device. When the PAP device is connected
9