Medistrom Pilot-12 Plus Guide D'utilisation page 23

Yellow LED
flashing (slowly)
Yellow LED
(alternates long
and short
flashing)
Four green LEDs
(flashing
together)
Yellow LED (two
short flashes
followed by one
long flash)

The
environmental
temperature is too
high for the battery
to operate safely

Incorrect A/C
adapter being used

PAP device
connected to
battery is
incompatible

Incorrect A/C
adapter being used

PAP device
connected to
battery is
incompatible

DC output cable
is damaged
23

Ensure that the
battery is placed where
there is no excess
heat. Do not rest the
battery on top of
radiators or electronic
devices that may emit
heat. Do not attempt to
use the battery in
temperatures
exceeding 40° C / 104°
F

Pilot-24: use the A/C
adapter provided with
your ResMed S9 or
ResMed AirSense 10
Pilot-12: only use the
A/C adapter that was
included with the Pilot-
12

Ensure that the PAP
device you are using is
compatible with the
Pilot-12 or Pilot-24 you
are using

Pilot-24: use the A/C
adapter provided with
your ResMed S9 or
ResMed AirSense 10
Pilot-12: only use the
A/C adapter that was
included with the Pilot-
12

Ensure that the PAP
device you are using is
compatible with the
Pilot-12 or Pilot-24 you
are using

Ensure that the cable
connected the Pilot-12