Control Panel: Pilot-12 Plus - Medistrom Pilot-12 Plus Guide D'utilisation

2.4 CONTROL PANEL: Pilot-12 Plus

1. CHARGE
2. OFF/ON SWITCH
2a - OFF/ON indicator light
3. CHARGE LEVEL INDICATOR
3a - discharge level indicator button
3b - warning light is the far left LED
3c - 4 charge indicator lights
3d - LO to HI charge level indicator image
4. USB PORT
5. DC OUT
6. Flashlight
7. Flashlight Control Button
8. Protection Alarm Mute Button
1. CHARGE PORT: Plug the 90W battery charger (B) into the battery's
CHARGE port. Ensure that the other end of the charger is plugged in
to the mains power outlet. Note: The battery can be charged
regardless of which position the OFF/ON switch is toggled. If the
battery is charging properly, the four green charge indicator LEDs
(3c) will flash, and will light up solid green once it is fully charged.
2. OFF/ON SWITCH: This switch allows the battery to be turned ON
for usage and turned OFF for storage. When the battery is switched
to the ON position, a blue OFF/ON indicator light (2a) will appear
above the switch. When the battery is switched to the OFF position,
the OFF/ON indicator light (2a) will NOT appear. IMPORTANT: Please
remember to turn this switch to ON position before you start using
the battery with the PAP device. Remember to toggle the switch to
14