Using With Pap Device As A Backup Power Supply; Product Specifications: Pilot-24 Plus - Medistrom Pilot-12 Plus Guide D'utilisation

with the heated humidifier and is used with the battery, the battery
run time may be significantly decreased. Use DC OUT port to
connect the PAP device to the battery. First, select the proper
output cable for the PAP device being used. Select Output Cable (B)
for ResMed S9™, or Output Cable (C) for ResMed AirSense™ 10.
Attach one end of the output cable to the PAP device and plug the
other end into the "DC OUT" port on the battery. Ensure that the
battery is switched to "ON" position by using the OFF/ON switch (2)
on battery control panel.
C. Using with PAP device as a backup power supply
Step 1 – Connect the battery to the charger (see instructions on
charging the battery).
Step 2 – Connect the battery to PAP device and turn battery ON
(see instructions above on using with PAP device as portable
battery)

1.6 PRODUCT SPECIFICATIONS: Pilot-24 Plus


Capacity: 98 Wh

Cell Type: Industrial grade genuine rechargeable lithium
ion cells manufactured by LG®

Rated Output: DC 24 V, 3.75 A

Life Span: Over 500 full discharge cycles

Case: Aluminum

Dimensions: 19x12x2 cm, Weight 1.8 lbs

Power Gauge: 5 stage LED display power level indicator
(includes charge and discharge state)

Recharge time: About 2.5 hours per battery
10