Télécharger Imprimer la page

gdw 1348 Instructions De Montage page 5

Publicité

Les langues disponibles

Les langues disponibles

Peugeot 307 break
04/2002 - ....
Ref. 1348
Fitting instructions
1)
Disassemble the bumper and remove the 2 undermost bolts of the buffer beam.
Remove the spare wheel.
2)
Place the mounting pieces (-f) and (-h) with the points (A) on the provided bolts against the underside of
the chassis beam. Insert the necessary security washers and nuts but do not tighten. Screw the bolts on
by (D) where the originals were removed (of the buffer beam) and tighten firmly. Insert the washers and
nuts on the other side.
3)
Place mounting pieces (-i) and (-g) with point (B) on the provided bolt on the outside of the chassis beam.
Insert the necessary washers and nuts and position the plates so that points (C) of the mounting pieces (-i)
and (-g) match those of the mounted pieces (-f) and (-h). Insert the bolts, washers and nuts but do not
tighten.
Insert afterwards the tow bar between the mounting pieces (-f) and (-h) so that the points (E) and (E') of
4)
the tow bar match those of the mounting pieces. Insert the necessary bolts, washers and nuts and tighten
everything firmly.
5)
Make an incision in the underside of the bumper as on sketch enclosed and assemble the bumper.
6)
Assemble (*) together with (-p) and (-s) and tighten also firmly.
Composition
1 tow bar reference 1348
1 ball T45L001
4 bolts M12x70
4 security nuts M12
1 socket plate P04 (-p)
1 security shackle (-s) (800053)
2 mounting tubes T45
2 mounting pieces T45
6 bolts M12x35
6 security washers M12
4 nuts M12
4 bolts M10x30
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
8 security washers M10
(*-*')
8 nuts M10
4 bolts M8x35
(*-*')
6 security washers M8
(*')
6 nuts M8
(*')
6 washers ø25x8,4x2
(*')
1 mounting piece (-g)
(*-*')
1 mounting piece (-i)
(E-E')
1 mounting piece (-f)
(E-E')
1 mounting piece (-h)
(E')
(C)
All bolts and nuts : quality 8.8
(A-C)
(A-C)
(D)
(B-D)
(B-D)
(B-D)
(B-C)
(B-C)
(A-C-D-E-E')
(A-C-D-E-E')

Publicité

loading