Télécharger Imprimer la page

Hilti DD 250-CA Mode D'emploi Original page 16

Publicité

Les langues disponibles

Les langues disponibles

Water collector (accessory)
W
3.1.3
Carriage DD-HD 30
Hand wheel sleeve 1:1
@
Hand wheel sleeve 1:3
;
Eccentric pin (for locking the diamond core
=
drilling machine)
Shear pin
%
Hand wheel
&
3.1.4
Vacuum base plate (accessory)
Vacuum release valve
@
Vacuum hose connector
;
Wheel assembly mount
=
3.2
Intended use
The product described is an electrically powered diamond core drilling machine. It is designed for the rig-
based wet drilling of through-holes and blind holes in (reinforced) mineral materials. Hand-held use of the
diamond core drilling machine is not permitted.
▶ Always use a drill stand when using the diamond core drilling machine. The drill stand must be sufficiently
anchored in the base material by an anchor base plate or vacuum base plate.
▶ Do not use a hammer or other heavy object to adjustment the base plate.
▶ Operate the tool only when it is connected to a power source providing a voltage and frequency in
compliance with the information stated on the rating plate.
▶ Comply with the safety rules and operating instructions for the accessories used.
3.3
Bluetooth
®
This product has Bluetooth.
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
To ensure a stable Bluetooth connection there must be a clear line of sight between the connected devices.
Bluetooth functions of this product
Consult the operating instructions of the paired device for detailed descriptions of the Bluetooth functions.
Service and status messages of the paired Hilti devices are shown on the display of the diamond core
drilling machine.
Connection with a mobile terminal device via the Hilti ON!Track 3 app for service functions and for
transmission of product-related analysis data.
Switching Bluetooth on or off
Hilti products ship ex-works with Bluetooth deactivated. Bluetooth switches itself on automatically
during initial operation.
To switch off, press and hold down the buttons
To switch on, press the buttons
Connecting products
The pairing with a Bluetooth-compatible Hilti device is sustained until the diamond core drilling machine is
paired to another Hilti device of the same type or Bluetooth is switched off. Pairing is also sustained even
when the products are switched off and then on again; paired products always automatically re-establish
their paired connection.
To pair with a Bluetooth-compatible Hilti device or mobile device, with Bluetooth switched on simulta-
neously press the
The time window for pairing with a Bluetooth-compatible Hilti device is 2 minutes. When the 2 minutes
have expired, the connection process will be canceled.
8
English
3
4
and
simultaneously.
and
buttons.
Sealing washer for water collector (acces-
E
sory)
Leveling indicator (2x)
(
Carriage lock
)
Supply cord guide
+
Adapter interface for DD AF-CA H
§
Carriage play adjusting screw (4x)
/
Pressure gauge
%
Vacuum seal
&
Leveling screw (4x)
(
and
simultaneously for at least 10 seconds.
2279864
*2279864*

Publicité

loading