AMIX AFF 2 Serie Manuel Utilisateur page 42

WEB INTERFACE
 IP parameters
Stick that box: as far as the SPL20 and AFFseries-2 are on the same
net, AFF displays the SPL20 date. Do not forget to specify SPL20 IP
address underneath.
AFFseries-2 displays the data from SPL20 (displays SPL20 GPO1
and GPO2). In that configuration the display does not need the
sensor (see example 1). When a sensor is connected, its
measurement are accessed using AFFseries-2 IP address.
Choose an IP for AFF. It should be under the same net as your routeur.
Example 1 :
if routeur IP is 192.168. .1 then AFF IP will be : 192.168. .xxx
(xxx between 2 and 254)
Example 2 :
If routeur IP is 192.168. .1 then AFF IP will be : 192.168. .xxx
(xxx between 2 and 254)
Attention : - IP address should be unique in the net.
- After IP modification, enter new AFFseries IP address in your browser address
window and validate.
 Internal configuration of the equipment
From this menu one can set:
 The site.
 The accurate localisation on the site.
 Offset
 Opto couplers 1 and 2 thresholds.
 Each opto coupler temporal weighting.
 A or C weighting.
ENGLISH
1
0
http:// 192.168.x.xxx
Example 1
1
0
42
PS 12V
SPL20
SWITCH
LAN
AMIX - AFFseries-2
Next
PS 5V