Settings; Before First Use; Daily Use - Electrolux EDC1072LDW Notice D'utilisation

8. SETTINGS

A B
A) Delicate button
B) Dryness button
C) Buzzer button
D) Start/Pause button
E) Delay button
8.1 Adjustment of the remaining
laundry moisture degree
To change the default degree of the
remaining moisture of the laundry:
1. Use the programme knob to set any
programme.

9. BEFORE FIRST USE

Before you use the appliance for the first
time do these operations:
• Clean the tumble dryer drum with a
moist cloth.

10. DAILY USE

10.1 Start a programme without
delay start
1. Prepare the laundry and load the
appliance.
CAUTION!
Make sure that when you
close the door, the
laundry does not catch
between the appliance
door and the rubber seal.
2. Set the correct programme and
options for the type of load.
3. Press the Start/Pause touchpad.
The programme starts.
All manuals and user guides at all-guides.com
C D E
2. Wait approximately 8 seconds.
3. Press and hold buttons (B) and (D) at
the same time.
One of the these indicators comes on:
• Tank - the maximum dry
laundry
• Filter - the more dry laundry
• Condenser - the standard dry
laundry
4. Press the button (D) again and again
until the indicator of the correct level
comes on.
5. To confirm the adjustment, press and
hold buttons (B) and (D) at the same
time for approximately 2 seconds.
8.2 Buzzer permanent off
To deactivate or activate the acoustic
signals, press and hold for approximately
2 seconds touchpads (A) and (B) at the
same time.
• Start a short programme (e.g. 30
minutes) with moist laundry.
10.2 Starting the programme
with delay start
1. Set the correct programme and
options for the type of load.
2. Press the delay start button again and
again as necessary.
You can delay the start of
a programme by 3, 6 or 9
hours.
3. Press the Start/Pause button.
The LEDs (9H, 6H, 3H) change on each 3
hours.
ENGLISH 11