Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
12
4.3
MINIMUM MANTEL CLEARANCES
EN
RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
We recommend all mantels made from non-combustible material. If using combustible materials, follow the
chart below.
NOTE: Mantel temperatures will rise above normal
temperatures and may be hot to the touch.
4.4
NAILING TAB
To install the appliance face flush with the finished
surface, position the framework to accommodate the
thickness of the finished surface. Bend out the six
nailing tabs, attached on top and on either side of the
appliance and secure to the 2x4 framing. The tabs
will facilitate the installation of either a
or
/
" (19.1mm) finished surface thickness.
3
4
W415-2164 / D / 08.23.18
CLEARLY MAINTAINED.
HEAT RESISTANT TO PREVENT DISCOLOURATION.
32
30
MANTEL
28
HEIGHT
26
24
2
4
6
MANTEL
DEPTH
/
" (12.7mm)
1
2
WARNING
!
TOP OF
FIREPLACE
8
10
73.1
8" MANTEL
6"
4"
2"
30" 28"
26"
24"
35 3/4"
Publicité
Chapitres
Table des Matières
Dépannage
