Grounding The Appliance; Minimum Clearance To Combustibles; Minimum Mantel Clearances - Napoleon CLEARion Serie Manuel D'installation Et D'opération

installation
EN
2.2

grounding the appliance

This appliance is for use on 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot receptacles, as shown in (B).
The green grounding plug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
(A)
2.3

minimum clearance to combustibles

2.4

minimum mantel clearances

WARNING
!
• When using paint or lacquer to finish the mantel, the paint or lacquer must be heat resistant to prevent
discoloration.
8" (203.2mm) for standard trim
8" (4.5" for Deep Trim)
4.5" (114.3mm) for deep trim
10
W415-1767 / F / 07.20.18
All manuals and user guides at all-guides.com
Grounding Methods
Metal Screw
Cover of
grounded
outlet box
(B)
Grounding Pin
Measurements are taken from the front trim
Bottom
Sides
Front / Back
Top
WALL
1MM GAP
SIDE VIEW
Not allowed in Canada
Adapter
(C)
Grounding Means
51.1
0"
0"
6" (152.4mm)
8" (203.2mm)
MANTEL
SIDE VIEW
8" (203.2mm)
8" (203.2mm)
8"