Midea MLH52S7AGS Manuel Du Propriétaire page 32

Problem
Door unlocks
or press Start
and machine
doesn't
operate
Water does
not enter
washer or
enters slowly
Wrinkling
32
Possible Cause
This is normal
Incorrect operation
Automatic self system
checks
Water supply is turned off • Turn on water supply.
Water valve screens are
stopped up
Improper sorting
Overloading
Incorrect wash cycle
Repeated washing in
water that is too hot
What To Do
• Front-load washers start
up differently than top-
load washers, and it takes
30 seconds to check the
system. The door will lock
and unlock.
• Simply open and close
the door firmly; then
press Start.
• After Start is pressed,
the washer does several
system checks. Water will
flow 60 seconds after
Start is pressed.
• Turn off the water source
and remove the water
connection hoses from
the upper back of the
washer. Use a brush or
toothpick to clean the
screens in the machine.
Reconnect the hose and
turn the water back on.
• Avoid mixing heavy items
(like work clothes) with
light items (like blouses).
• Load your washer so
clothes have enough
room to move freely.
• Match cycle selection to
the type of fabric you are
washing (especially for
easy care loads).
• Wash in warm or cold
water.