Washer Use; Control Panel - Midea MLH52S7AGS Manuel Du Propriétaire

•
The water faucets are turned on.
•
The unit is level and all four leveling legs are firmly on the floor.
•
The shipping support hardware is removed and saved.
•
The drain hose is properly tied up.
12.
Run the washer through a complete cycle.
13.
If your washer does not operate, please review the Before You Call For
Service section before calling for service.
14.
Place these instructions in a location near the washer for future
reference.

WASHER USE

CONTROL PANEL

QUICK START
Press the Power button.
If the screen is dark, a press of the Power
button will "wake up" the display.
Select a wash cycle. (Defaults are set for
each cycle. These default settings can be
changed. See Control setting for more
information).
Press the Start/Pause button.
13