Sony TA-VA80ES Mode D'emploi page 31

Remote Operates
Button
0-9, >10 Tuner
CD player/MD
deck/LD player
TV/VCR
CH/PRESET Tuner
+/–
TV/VCR
DISC CD player
D.TUNING Tuner
D. SKIP CD player
SHIFT Tuner
0/)
CD player
Tape deck/MD
deck/VCR/LD
player
=/+ CD player/
MD deck/LD
player
P
CD player/
Tape deck/MD
deck/LD
player/VCR
( CD player/
Tape deck/MD
deck/LD
player/VCR
p
CD player/
Tape deck/MD
deck/LD
player/VCR
9 Tape deck
r
Tape deck
r + ( Tape deck/MD
deck/VCR
Function
Selects preset numbers.
Selects track numbers.
0 selects track 10.
Selects channel numbers.
Scans and selects preset
stations.
Selects preset channels.
Selects discs (CD player
with multi-disc changer
only).
Selects the direct tuning
mode.
Skips discs (CD player with
multi-disc changer only).
Selects the memory bank.
Searches tracks (forward or
backward).
Fast forwards or rewinds.
Skips tracks.
Pauses play or record. (Also
starts recording with
components in record
standby.)
Starts play.
Stops play.
Starts play on the reverse
side.
Sets tape decks to the record
standby mode.
Starts recording when
pressed with ( (or 9 on
tape deck).
Additional Information
Remote Operates
Button
RMS Tape deck
DIRECTION
RMS CLEAR Tape deck
RMS Tape deck
DIRECTION
9/(
ENTER TV/VCR/DBS
tuner/CD
player
VISUAL TV/VCR/DBS
POWER tuner/LD
player
-/- - TV
SUB CH +/– TV
POSITION TV
SWAP TV
P IN P TV
JUMP TV
ANT TV/VTR VCR
MASTER VOL TV
+/–
MUTING TV
SLOPE —
5.1 INPUT —
*
RMS: Random Music Sensor
**
Only for Sony TVs with the picture-in-picture function
Getting Started
Function
Selects tape direction (tape
*
decks with the RMS
function only).
*
Clears RMS program (tape
decks with the RMS
function only).
Programs tracks (tape deck
*
with the RMS function
only).
Changes channels/discs
when used with 0-9.
Turns on or off the power.
Selects the channel entry
mode, either one or two
digit (in Europe only).
Selects preset channels for
**
the small picture.
Changes the position of the
**
small picture.
Swaps the small and the
**
large picture.
Activates the picture-in-
**
picture function.
Jumps back and forth
between the previous and
current channels.
Selects output signal from
the antenna terminal: TV
signal or VCR program.
Normally, adjusts the
master volume of the
amplifier.
If TV CONTROL ON was
pressed, it adjusts the
volume on the TV.
Normally, mutes the sound
from the amplifier.
If TV CONTROL ON was
pressed, the sound on the
TV itself is muted.
Not applicable.
Not applicable.
EN
31