Overview Of Controls; Preparing The Remote Control - Panasonic SC-UA3 Manuel Du Propriétaire

UA3PP_TQBJ2018_en.fm Page 6 Monday, May 15, 2017 9:58 AM

Overview of controls

Do the procedures with the remote control. You can also use the buttons on the unit if they are the same.
A
Standby/on switch [`], [1]
Press to turn the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a
small amount of power.
B
Select the audio source
On the unit:
To start Bluetooth ® pairing, press and hold [
C
Basic playback control
D
View the setup menu
E
View the content information
F
Select or confirm the option
G
Open or close the disc tray
H
Decrease the brightness of the display panel
The illumination is also turned off.
To cancel, press the button again.
I
Adjust the volume level
J
Mute the sound
To cancel, press the button again.
"MUTE" is also canceled when you adjust the volume
or when you turn off the system.
K
View the play menu
L
Select the sound effects
6
6
digital printing
M
Select the jukebox
N
USB port ( )
O
Disc tray
P
Display panel
Q
].
Remote control sensor
Distance: Within approximately 7 m (23 ft)
Angle: Approximately 20° up and down,
30° left and right

Preparing the remote control

Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with
those in the remote control.