Chauvet Professional ROGUE R2X BEAM Guide De Référence Rapide page 4

EN
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Overhead Mounting
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
<UP> Navigates upwards through the menu list or increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list or decreases the numeric value when in a function
Menu Map
Main Level
Address
DMX
Running
Mode
Manual Test
3
QUICK REFERENCE GUIDE
Safety Notes. Use at least one mounting point per product. Make sure the
Safety Cable
Mounting Clamp (x2)
Omega Bracket (x2)
Programming Levels
001–512
19CH
16CH
Auto Test
Pan
Pan Fine
Tilt
Tilt Fine
P/T Speed
Floor Mounting
Description
Sets the DMX starting address
Selects the DMX mode
Runs the product's test sequence
Allows manual control of all settings from
000–255
the control panel
Rogue R2X Beam QRG Rev. 3