Unloading The Film; Automatic Rewind; Mid-Roll Change (Mrc) - Kodak ADVANTIX C800 Mode D'emploi

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds the
film into the cassette after the last
picture is taken.
1. Wait for the camera motor to stop to
ensure that the film is completely
rewound into the film cassette.
• The
LCD PANEL
REWINDING" and the
(24) counts down to "0."
COUNTER
• When the film is fully rewound,
the panel indicates
LCD
"REMOVE FILM."
2. Turn the camera upside down and
slide the -
FILM DOOR LATCH
the
FILM DOOR
3. Remove the film cassette from the
camera and reload with new KODAK
ADVANTIX Film.
• The Film Status Indicator (FSI) on
the film cassette is at
panel displays " E ."
28
(15) displays "FILM
FRAME
(23) to open
(20).
and the

Mid-roll change (MRC)

You can remove your film in mid-roll and
later reload it and continue picture-
taking. The Film Status Indicator (FSI) on
a partially exposed film cassette is set
to (#2 position). When you reload the
film cassette into the camera,
" SEARCHING " appears on the LCD
panel. The camera automatically
advances the film to the first unexposed
frame and " FRESH FILM " appears on
the LCD panel. Film can be rewound and
reloaded until the last picture is taken.
The camera automatically rewinds the
film and sets the FSI to
when the last picture is taken.
1. Open the
located below the
2. Gently press the
BUTTON
activator on the camera strap to start
the auto-film rewind.
LCD
(#3 position)
-
CONTROL PANEL COVER
LCD PANEL
-
MID ROLL
(38) with the control-button
TITLE PRINT DATE SELECT ENTER
(18)
(15).
-
CHANGE