Date And Time Imprinting; Setting The Date And Time; Unloading The Film; Automatic Rewind - Kodak ADVANTiX C650 Zoom Mode D'emploi

DATE AND TIME IMPRINTING

Traditional cameras print date and/or
time information directly onto the film.
Your camera uses the film's magnetic
data-recording capability to record date
and time information which your
photofinisher can imprint on the back of
your photographs. This camera has a
quartz clock and automatic calendar
through the year 2099. You can record
the date in a choice of three date
formats (year/month/day, month/day/
year or day/month/year) and one time
format (hour/minute).

Setting the date and time

1. Press the
SELECT BUTTON
repeatedly to
scroll and
select
desired date
format.
2. Press the
select button
again and
hold the button for approximately 2
seconds until the first number(s) of
(2)
O N
O F
F
the date/time position "blinks."
3. Press the
ENTER BUTTON
the "blinking" number(s).
4. Press the select button to store the
selected number(s) and to activate the
next "blinking" number(s) (follow steps
3 and 4 to complete your selection).

UNLOADING THE FILM

Automatic rewind

The camera automatically rewinds the film
into the cassette after the last exposure.
1. Wait for the film to completely rewind
into the film cassette.
• When the motor stops running, the
FRAME COUNTER
2. Push the -
FILM DOOR LATCH
• The motor will run for a brief time,
then the film door will open.
3. Remove the film cassette from the
camera and reload with new KODAK
ADVANTIX Film.
• The FSI on the fully-exposed film
cassette will be at
the LCD panel will display "E."
(3) to change
(30) will indicate "0."
(21) up.
(#3 position) and
17