Blaupunkt BLUEBOT XVAC Mode D'emploi page 22

APP CONNECTION GUIDE
Place the robot in the charging station in order to
charge. Ensure the robot is fully charged before use.
Download the app for your specific robot.
The app is called 'Bluebot app' and can be found in
both the Appstore and Google play.
APPLE ANDROID
Open the Bluebot app
and press the '+' icon to
add your device.
Enter your Wi-Fi
password and
press confirm.
Only 2.4 GHz Wi-Fi networks
are supported
Only 2.4 GHz
Wi-Fi networks are
supported. Please see
your router manual
Confirm
for help.
1
Remove the robot from the charging station.
4
Register a new account
if you are not yet an
existing user.
7
Select the XVAC
(BLE+Wi-Fi) device to add.
Add Device
10
Your robot is connecting
to the Bluebot app,
please wait.
22
2
To switch the robot on, press the 'on' button located on
top of the device and hold for a few seconds. Wait until
the robot has started fully.
5
Once registered, ensure the robot is removed from its
charging station. Turn on your Robot by holding the 'On
button' . When your robot has turned on, press both the
'Home button' and 'On button' simultaneously. Hold until
Germany +49 the robot states that Wi-Fi connection has been lost.
8
Power on the XVAC and
ensure your smartphone's
Bluetooth is on.
Note: Please complete the
BLUEBOT XVAC BLUEBOT XVAC
network distribution
(Wi-Fi) (BLE+Wi-Fi)
within 3 minutes. After 3
minutes, you must restart the
process from the beginning.
11
After the connection is
complete, you may give
your robot a name.
Happy vacuuming!
EN
3
6
9
V
Next
12
V