Max running time outside programmed time.
[Time outside timer (mins)] – The duration of the bathing cycle outside
code-locked, programmed time.
Removing limescale
[De-scaling (hrs)] – Timer function that records total operating time and
counts down to signal when it is time to clean the equipment from any
limescale deposits. Factory setting: 40 hours.
TYLARIUM
A Tylarium gives you full freedom to enjoy all types of sauna bathing –
dry saunas, wet saunas and steam saunas, too. As the relative humidity
in a Tylarium tends to be higher than in traditional sauna bathing, you are
kindly requested to take note of the following advice.
• Treat the lower mouldings of any windows in sauna room doors or
walls with boat varnish, and seal the gap between the pane of glass
and the moulding with bathroom silicone. This prevents any
condensation on the glass from seeping into the gap.
• Treat threshold and door handles with a couple of coats of boat
varnish. This preserves the finish of the wood and makes cleaning the
sauna much simpler. Oil sauna benches, skirting panels and backrests
on both sides with Tylö sauna oil.
IMPORTANT! Leave all other wood in the sauna room untreated.
In the event of a problem, please contact your Tylö
retailer.
© This content may not be reproduced in part or in whole without written permission from Tylö.
Tylö reserves the right to amend specifications of materials, construction and design.
14