The tool must neither be wet nor used in humid environment.
Do not use the tool near explosive materials.
Do not work with materials containing asbestos
Modifications of the tools are prohibited.After an interruption of work
the drill machine should only be switched on again if the drill bit can be
turned easily.
Do not use the machine when one part of the housing is damaged or
in case of damages on the switch.
Electric tools have to be inspected by a specialist in regular intervals.
When using the machine, no cooling water is allowed to get into the
motor and the electric mounting parts, no matter in which position you
work.
If water leaks from the space between gearbox housing and water
supply, stop working and have the tool repaired in an authorised
service workshop.
The diamond wet drill END 40 A is not suitable for overhead
drilling
Keep the handles dry, clean and free of oil and grease.
Do not touch rotating parts.
Persons under 16 years of age are not allowed to use the tool.
Always work concentrated. Always work in a carefully considered
way and do not use the tool when you are not concentrated.
Always hold the machine with both hands and maintain a safe
standing position. Always consider the reaction moment of the
tool.
Remove the battery pack from the machine before making any
adjustments, changing tools, maintaining or cleaning.
Avoid inadvertent starts by making sure that the machine is switched
off before fitting the battery pack.
Safety instructions for battery pack:
Protect battery packs from water and moisture!
Do not expose battery packs to fire!
Do not use faulty or deformed battery packs!
Do not open battery packs!
Do not touch contacts or short-circuit battery packs!
A slightly acidic, flammable fluid may leak from defective Li-ion battery
packs! If battery fluid leaks out and comes into contact with your skin,
rinse immediately with plenty of water. If battery fluid leaks out and
comes into contact with your eyes, wash them with clean water and
seek medical attention immediately!
13