Publicité
Les langues disponibles
Les langues disponibles
Coefficient value (1.000, 9.999)
Process value is multiplied with this value.
This parameter is active if
Unit selection
Unit is °C
Unit is °F
Unit is Voltage. This selection is active if
input is selected
No unit. This selection is active if
selected
Operating Scale Minimum Value
(Scale Low Point, Scale High Point)Unit
Used for Proportional band calculation and display blink.
Operating Scale Maximum Value
(Scale Low Point, Scale High Point)Unit
Used for Proportional band calculation and display blink.
Display offset for process value (Scale -10%, Scale
+10%)Unit
This parameter value is added to the process value.
Filter Time (0.0, 900.0)Second
Defines filter time for display value.
Cold Junction Compensation
This parameter is active if process input is selected TC input.
Cold junction compensation is active.
Cold junction compensation is not active.
Scale: The difference, between high point and low point of the process
input type. Example: If tCSL = 2 (low point is -200, high point is 900),
then scale is 1100. If input type is Voltage/Current, then the scale is
difference between tPoH and tPoL parameters.
ZV
oltage/Current input is selected.
ZVoltage/Current
ZV
oltage / current input is
12
Publicité
