Publicité
Les langues disponibles
Les langues disponibles
en
IMPORTANT: READ AND UNDERSTAND THIS OPERATIONAL MANUAL
PRIOR TO ASSEMBLING, STARTING UP OR CONDUCTING MAINTENANCE
ON THIS COOLER. USING THE COOLER INCORRECTLY CAN CAUSE
SERIOUS OR FATAL INJURIES. KEEP THIS MANUAL FOR FURTHER
►►1. SAFETY INFORMATION
(PIC. 1)
IMPORTANT: READ AND UNDERSTAND
THIS OPERATIONAL MANUAL BEFORE AS-
SEMBLING, COMMISSIONING OR PERFORMING
MAINTENANCE ON THIS APPLIANCE. INCOR-
RECT USE OF THE APPLIANCE CAN CAUSE SE-
RIOUS INJURY. KEEP THIS MANUAL FOR FUR-
THER REFERENCE.
IMPORTANT: This appliance is not suitable
for use by persons (including children) with re-
duced physical, sensory or mental capacities or
who lack experience or knowledge unless super-
vised by a person responsible for their safety.
Children must be supervised to make sure they
do not play with the appliance.
►1.1. Only fill the cooler tank only with clean wa-
ter.
►1.2. Before carrying out any operation, make
sure the cooler, including the power supply
cable and the control panel are perfectly dry,
in order to avoid any risk.
►1.3. After filling the tank, handle the cooler
carefully.
►1.4. Comply with all local legislation and cur-
rent regulations when using the cooler.
►1.5. Keep the cooler dry, in order to avoid elec-
tric shocks. Hands must always be dry.
►1.6. Use only in ventilated and dry areas.
►1.7. For indoor use only.
►1.8. Only power the cooler with the voltage and
frequency as specified on the nameplate.
►1.9. Do not cover the cooler with paper, card-
board, plastic, metal sheets or any other in-
flammable material during use, in order to pre-
vent any risk.
►1.10. The cooler must be used on a stable and
levelled surface, in order to prevent any risk.
►1.11. Disconnect the cooler from the mains
power supply when not in use.
►1.12. Never block the cooler's air vents or the
air outlet.
►1.13. The minimum safety distance recom-
mended between the cooler and walls or other
items is 0.5 m.
►1.14. Never move, handle, refuel or conduct
maintenance on the cooler when it is connect-
ed to the mains or in operation.
REFERENCE.
►1.15. The cooler (power cable included) must
be kept at a suitable safety distance from heat
sources.
►1.16. In any case, the cooler must be opened
and/or repaired by authorised after-sales cen-
tre.
►1.17. If the power supply cable is damaged, it
must be replaced by a technical support cen-
tre to prevent any risk.
►1.18. In the event of incorrect cooler operation,
immediately disconnect the electrical power
supply and contact the support centre.
►1.19. Protect the power cable from potential
damage caused by the movement of vehicles
or pedestrians. Improper connection to elec-
trical voltage or improper installation may re-
sult in electric shocks.
►1.20. Conditions of use:
A) Temperature of the air: 18°C - 45°C; Tem-
perature of the water: <45°C.
B) The air must be free of dust and pollutants,
otherwise cleaning must be carried out more
frequently.
►1.21. The water used to fill the cooler tank must
come from an aqueduct. If it is not possible to
draw from an aqueduct, the water introduced
must be subjected to a sanitation treatment,
according to European Directive 98/83/EC.
-We recommend using water with a hardness
of less than 15°f.
-The cooler tank must be emptied and sani-
tised periodically depending on the use.
-The evaporative panel surfaces must be pe-
riodically inspected and sanitised depending
on the use.
-For sanitation operations, biocidal products
that comply with European regulation no.
582/2012 must be used.
►►2. UNPACKING
►2.1. Remove all packaging material used to pack
and deliver the cooler and dispose of it in compli-
ance with current standards.
►2.2. Check for any damage incurred during trans-
port. If the cooler appears damaged, immediately
inform the dealer from whom it was purchased.
Publicité
