Safety Symbols - EGO CS1610 Guide D'utilisation

Scie à chaîne sans fil de 40 cm 16 po au lithium-ion de 56 v
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY SYMBOLS

The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING:
Operator's Manual, including all safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to following all instructions listed below
may result in electric shock, fire, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
May be used in conjunction with other symbols or pictographs.
foreign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shield and a full face shield
when needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use eye
protection which is marked to comply with ANSI Z87.1.
4
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC
Be sure to read and understand all safety instructions in this
WARNING!
The operation of any power tools can result in
Indicates DANGER, WARNING, OR CAUTION.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cs1610-fc

Table des Matières