EGO CS1610 Guide D'utilisation page 14

WARNING :
WARNING :
of the chain brake may deteriorate. Always keep the device clean.
Low Kickback Saw Chain
The rakers (depth gauges) ahead of
each cutter can minimize the force of
a kickback reaction by preventing the
cutters from digging in too deeply at the
kickback zone. Only use a replacement
chain that is equivalent to the original
chain or has been certified as a low
kickback chain per ANSI B175.1. A low
kickback tooth saw chain is a chain that
has met the kickback performance requirements of ANSI B175.1 (American National
Standard for Power Tools - Gasoline-Powered Chain Saws-Safety Requirements) when
tested on the representative sample of chain saws below 3.8 c.i.d. specified in ANSI
B175.1.
The bumper drive link (Fig. 2) also helps deliver low-kickback performance.
CAUTION:
of the low kickback qualities and extra caution should be used.
GUIDE BAR
This saw comes equipped with a guide bar that has a small radius nose. Small radius
noses generally have less potential for kickback. When replacing the guide bar, please
order the guide bar we recommend in this manual or the guide bar with the correct
specification with regarding to this product.
14
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC
Confirm that the chain brake works properly before each use.
If the chain brake is clogged with wood chips, the function
As saw chains are sharpened during their useful life, they lose some
2
Bumper driver link
Cutter type