EGO CS1610 Guide D'utilisation page 15

ADDITIONAL WARNINGS
◾
A chain saw is intended for
two-handed use (Fig. 3). Serious
injury to the operator, helpers, and/
or bystanders can result from one-
handed operation.
◾
Make sure that the area in
which you are cutting is free
from obstructions. Do not let
the nose of the guide bar contact
a log, branch, fence, or any other
obstruction that could be hit while
you are operating the saw.
◾
Always cut with the unit running
at full speed. Fully squeeze the
switch trigger and maintain cutting
speed.
◾
With a basic understanding
of kickback, you can reduce
or eliminate the element of
surprise (Fig.4 – Fig. 6). Sudden
surprise contributes to accidents.
◾
Keep proper footing and balance
at all times.
◾
Avoid unintentional contact
with the stationary saw chain or
guide bar rails. These can be very
sharp. Always wear gloves and long
pants or chaps when handling the
chain saw, saw chain, or guide bar.
◾
Never operate a chain saw
that is damaged or improperly
adjusted or that is not
completely and securely
assembled. Be sure that the saw
chain stops moving when the trigger
switch is released.
56V LITHIUM-ION CORDLESS CHAIN SAW — CS1610/CS1610-FC
3
4
5
6
Linear kickback
Rotational
kickback
Kickback
danger zone
Pinch
15