Transport - AL-KO MT 40 Mode D'emploi

GB
Malfunction Cause
Branches Cutting
are not blade is
cleanly cut. blunt.
Branches
The sliding
are often
play of the
jammed in
cutting blade
the cutting
is too great.
blade.
Motor run- Appliance
ning, but the faults
cutting blade
does not
move.
Appliance vi- Appliance
brates un- faults
usually.
Other faults See "Multitool MT 40 – basic ap-
pliance" operating instructions.
NOTE
If you encounter any malfunctions that
are not listed in this table or that you
cannot rectify yourself, please contact
our customer service.

10 TRANSPORT

Before transporting, carry out the following meas-
ures:
1. Switch off the appliance:
2. Remove the rechargeable battery from the
basic appliance.
3. Separate the basic appliance, extension pipe
(if present) and attachment from each other.
NOTE
The nominal energy of the rechargeable
battery is more than 100 Wh. Therefore,
observe the following transport instruc-
tions.
28
Remedy
Contact an AL-
KO service
centre.
Contact an AL-
KO service
centre.
Contact an AL-
KO service
centre.
Contact an AL-
KO service
centre.
The li-ion rechargeable battery contained in the
appliance is subject to the hazardous goods law,
but can be transported under simplified condi-
tions:
■
The rechargeable battery can be transported
on public roads by the private user without
further conditions provided it is packaged for
retail sale and the transport serves personal
purposes.
■
Commercial users who carry out the trans-
port in connection with their main activity
(e.g. delivery from and to building sites, or
demonstrations) can also take advantage of
this simplification.
In both cases, it is essential to take the mandat-
ory precautions mentioned above to prevent any
leakage of the contents. In other cases, it is es-
sential to comply with the regulations of the haz-
ardous goods law. In the case of non-compli-
ance, severe penalties can be imposed on the
sender and possibly the transporter.
Additional notes on transport and shipment
■
Only transport or send the li-ion rechargeable
battery in an undamaged condition.
■
For transporting the rechargeable battery,
only use the original cardboard box or a suit-
able hazardous goods cardboard box (not re-
quired for rechargeable batteries with a nom-
inal energy less than 100 Wh).
■
Tape off exposed rechargeable battery con-
tacts to avoid a short circuit.
■
Secure the rechargeable battery against
shifting in the packaging to avoid damage to
the rechargeable battery.
■
Ensure the correct marking and documenta-
tion of the shipment for transport or shipping
(e.g. by parcel service or freight forwarding).
■
Check in advance that transport with the se-
lected service provider is possible and indic-
ate the shipment.
We recommend involving a hazardous goods
specialist in preparation of the shipment. Also
heed any further national regulations.
Transport
HTA 4045