Endress+Hauser RIA261 Mode D'emploi page 47

Digital field display
Dimensions
Weight
Materials
Terminals
Earth (ground)
Terminals
Cable entry
Pressure
compensation
Electronic
compartment
Display
Display range
Offset
Operation
Mechanical construction
H: 80 mm, W: 175 mm, D: 65 mm
Approx. 800 g
• Housing: Die cast aluminium, epoxy coated with glass insert
• Wall/stand pipe bracket: Stainless steel 1.4301
• Tension strip: Stainless steel 1.4301
Plug-on screw terminals, Terminal sizing:
1.5 mm² solid core, 1.0 mm² standed with ferrule
Earth (ground) connection on housing exterior:
Terminal range 2.5 mm²
2 x metric M20x1.5 cable entries
alternative: 2 x NPT 1/2" cable entries
For ventilation and pressure comensation of the electronic compartment a
mainenance free GORE-TEX
There is room for the installation of a further electronic insert e.g. Tempe-
rature head transmitter underneath the hinged electronic components. H:
60 mm, W: 140 mm, D: 30 mm
Display and operating level
5 digit LC display, 26 mm character height, rear illuminated, analogue
value display in 10% steps. Indication of over/under range input.
-19999 to +99999
-19999 to +32767
3 push button operation (-/+/E)
®
membrane is built in
11 Technical data
47