Publicité
Les langues disponibles
Les langues disponibles
3
Operation
How to use:
1. Prepare for use connection:
• Insert the flexible tube in to the air intake duct.
To do this, slide intake duct cover, insert the
tube and press until it clicks into the position.
To remove it, press down the button and pull out
the hose.
• Connect the flexible tube, extensive tube and
accessories correctly.
2. Switch on the appliance:
Before use please check the filter bag is installed.
The Vaccum Cleaner will not work without the filter
bag.
• Press the ON/OFF button to switch the appliance
on.
Change the air power control knob on the handle
adjusts the suction. The greater air door, the lesser
the suction.
3. Please take off the dust bag when using for the
wet function.
4. Assemble 4 universal wheels at the bottom.
Safety Device:
• When the Vacuum Cleaner is filled with water
in the dust barrel, the float will rise and the
appliance will stop working. In addition to this you
will hear an abnormal sound. If the power supply
hasn't been cut off yet, immediately cut off the
power supply and spill the water in the barrel.
Once done restart the machine.
• When the vacuum is overturned, the float will
risen. In that case, cut off the power supply and
position the vaccum in the upright position.
• If you run the vacuum or leave it alone while the
float is risen, it may damage the motor and lead
to fire.
Vacuum cleaner / User manual
9 / EN
Publicité
