External audio sources
Adjusting the rear AUX input
mode
You can select between these settings for
the rear AUX input:
•
CDC OFF:
C'n'C mode for C'n'C-capable Blaupunkt
interfaces.
•
CDC ON:
Mode for non-C'n'C-capable Blaupunkt
interfaces, CD changers and other ex-
ternal audio sources.
The C'n'C mode is activated by default.
To toggle between "CDC OFF" and "CDC
ON",
press the MENU•OK button 5.
u
The display shows "MENU".
u
Press the
or
until "VARIOUS MENU" appears on the
display.
button 4 to open the
u
Press the
menu.
u
Press the
or
edly until "CDC OFF" or " CDC ON" is
displayed.
u
Press the
or
between "CDC OFF" and "CDC ON".
If you change the setting, the device briefl y
switches off and back on again with the se-
lected setting (Reset).
36
All manuals and user guides at all-guides.com
button 4 repeatedly
button 4 repeat-
button 4 to toggle
Connecting other external audio
sources
If no C'n'C-capable Blaupunkt accessory
device and no CD changer is connected to
the device, you can connect other external
audio sources via the rear AUX input, such
as portable CD players, MiniDisc players or
MP3 players.
Note:
An adapter cable is needed to connect
an external audio source via the rear
AUX input. You can obtain this cable
(Blaupunkt no.: 7 607 897 093) from
your Blaupunkt dealer.
If you want to connect such an external au-
dio source, proceed as follows:
1.
Check the mode of the rear AUX input
and, if necessary, select the setting
"CDC ON". For further details, please
read the section "Adjusting the rear
AUX input mode" in this chapter.
2.
Connect the external audio source to
the rear AUX input while the device is
switched off.
3.
In the menu of the device, switch on the
external audio source. For further de-
tails, please read the following section,
"Switching the external audio source
on/off and selecting it".
4.
If necessary, make additional settings
for the external audio source. For fur-
ther details, please read the additional
sections in this chapter.