Kettler X-ROW E3 Instructions De Montage page 4

Assembly Instructions
GB
For Your Safety
The unit should be used only for its intended purpose, i.e. for
n
physical exercise by adult persons.
Any other use of the equipment is prohibited and may be dan-
n
gerous. The manufacturer cannot be held liable for damage or
injury caused by improper use of the equipment.
This unit has been designed in accordance with the latest stan-
n
dards of safety. Any features which may have been a possible
cause of injury have been avoided or made as safe as possible.
Incorrect repairs and structural modifications (e.g. removal or re-
n
placement of original parts) may endanger the safety of the
user.
Damaged components may endanger your safety or reduce the
n
lifetime of the equipment. For this reason, worn or damaged
parts should be replaced immediately and the equipment taken
out of use until this has been done. Use only original KETTLER
spare parts.
If the equipment is in regular use, check all its components
n
thoroughly every 1 – 2 months. Pay particular attention to the
tightness of bolts and nuts.This applies especially to the securing
bolts for saddle and handelbar.
To ensure that the safety level is kept to the highest possible stan-
n
dard, determined by its construction, this product should be ser-
viced regulary (once a year) by specialist retailers.
Instruct persons using the equipment (in particular children) on
n
possible sources of danger during exercising.
The unit requires a power supply of 220-230 V/50 Hz. It should
n
be connected only to a safety socket with a single 10-A fuse. Be-
fore commissioning the appliance pay attention to the fact that
the correct plug-in power supply unit (observe marking) has
been connected properly.
Important: Do not under any circumstances carry out electrical
n
repairs or alterations yourself. Always ensure that such work is
done by a properly qualified electrician.
Handling the equipment
Before using the equipment for exercise, check carefully to en-
n
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
n
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The machine is designed for use by adults and children should
n
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed in
its proper use and supervised accordingly.
The unit complies with the EN 957-1, -7, class SA.
n
Before beginning your first training session, familiarize yourself
n
thoroughly with all the functions and settings of the unit.
A slight production of noise at the bearing of the centrifugal
n
Instructions for Assembly
Ensure that you have received all the parts required (see check
n
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
4
Important: disconnect the apparatus from the mains before
n
doing repair, maintenance or cleaning work.
Do not use a multiple power socket for the running belt. If an ex-
n
tension cable is being used, ensure that it complies with the VDE
regulations.
When the unit is not in use, unplug it from the power supply.
n
Ensure that the power cable is not pinched and that no-one can
n
trip over it.
All electric appliances emit electromagnetic radiation when in
n
operation. Please do not leave especially radiation-intensive ap-
pliances (e.g. mobile telephones) directly next to the cockpit or
the electronic controlsystem as otherwise values displayed might
be distorted (e.g. pulse measurement).
Before beginning your program of exercise, consult your doctor
n
to ensure that you are fit enough to use the equipment. Base
your program of exercise on the advice given by your doctor. In-
correct or excessive exercise may damage your health!
Any interference with parts of the product that are not described
n
within the manual may cause damage, or endanger the person
using this machine. Extensive repairs must only be carried out
by KETTLER service staff or qualified personnel trained by KETT-
LER.
Always observe the general safety rules and precautions for
n
working with electrical equipment.
Before beginning your program of training, study the instruc-
n
tions for training carefully.
Our products are subject to a constant innovative quality assu-
n
rance. We reserve the right to perform technical modifications.
In case of enquiry, please contact your KETTLER dealer.
n
Attention! The unit should be positioned in such a way that the-
n
re is a space of 100 cm on both sides and 150 cm behind it.
mass is due to the construction and has no negative effect upon
operation.
The unit has a magnetic brake system.
n
The equipment is independent of revolutions per minute.
n
Please ensure that liquids or perspiration never enter the machi-
n
ne or the electronics.
Before use, always check all screws and plug-in connections as
n
well as respective safety devices fit correctly.
Always wear suitable shoes when using.
n
Do not use corrosive or abrasive materials to clean the equip-
n
ment. Ensure that such materials are not allowed to pollute the
environment.
Before assembling the equipment, study the drawings carefully
n
and carry out the operations in the order shown by the dia-
grams. The correct sequence is given in capital letters.