Publicité
Les langues disponibles
Les langues disponibles
2
Operation
Important:
There will be a delay in the locomoti-
ve's reaction to each change in
speed, depending on how you have
set the acceleration/braking delay.
Turning the speed control knob to
the left past the "0" setting: Reverses
the locomotive's direction of travel.
Important:
On the Control Unit 6021 two arrows
to the right of the address display
indicate the direction of travel for the
locomotive.
Arrow pointing up:
Locomotive runs forward.
Arrow pointing down:
Locomotive runs in reverse.
22
Pressing the "function" button:
Turns the headlights on.
Pressing the "off" button:
Turns the headlights off.
Pressing button "f2":
Turns the sound effects circuit on
(locomotive operating sounds).
Pressing button "f2" again turns the
sound effects off.
Pressing button "f3":
Turns the sound of a horn on. Now
quickly turn this function off by
pressing button "f3" again! Otherwise,
it can lead to malfunctions.
Starting status:
Indicator LED above button "f4" is off:
Pressing button "f4" does the following:
Minimizes the acceleration and braking
delay that has been set.
Starting status:
Indicator LED above button "f4" is on:
Pressing button "f4" does the following:
Turns the acceleration and braking
delay that has been set on the digital
electronic circuit back on.
2.3.3 Running the Locomotive
with Delta
To operate the locomotive with Märklin
Delta you use the Delta Mobil to sel-
ect the address, that has been set on
the former. The locomotive will run
forward when you turn the speed
control knob to the right of the center
position. Turning the speed control
knob to the left of the center position
will cause the locomotive to run in
reverse. The headlights change
direction with the direction of travel
and are on all of the time. The
maximum power output of the
Delta Station is sufficient to operate
2 to a maximum of 3 single motor
locomotives at the same time.
All other functions (sound effects) are
always turned off in Delta operation.
Publicité
