Panasonic AK-HRP150G Mode D'emploi page 11

Major operating controls and their functions
 Iris f-number, master pedestal display selector switch [CHECK]
This switch is used to toggle between the f-number display and master pedestal display.
 Iris f-number, master pedestal indicator
This indicator displays figures for the iris f-number and master pedestal.
 Auto iris switch [AUTO]
This switch is used to turn on the auto iris function.
Switch lamp lighted: Auto iris status
 Tally indicator [TALLY]
This lights when the tally input (MAKE) is supplied to the tally connector.
 Master pedestal control [M-PED]
This control is used to adjust the master pedestal level. When it is turned clockwise, the
master pedestal level increases.
 Iris control [IRIS]
This control is used to adjust the lens iris level.
- 10 (E) -