Promise Technology VessRAID 1000f Serie Guide De Démarrage Rapide page 16

VessRAID 1000f, 1000i, 1000s Series Quick Start Guide
Management Path
The VessRAID controller has one (1) Ethernet RJ-45 Management Port
connector. See Figure 15.
To establish the management path:
1. Attach one end of an Ethernet cable to the network connector or standard
NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on the standard
network switch.
See page 17, Figure 16.
2. Attach one end of an Ethernet cable to one of the ports on the standard
network switch.
Attach the other end of the Ethernet cable to the Management Port on the
VessRAID subsystem.
If you have multiple VessRAID subsystems, Host PCs or Servers, repeat
steps 1 and 2 as required.
Figure 15.VessRAID 1840f+ data and management ports. 1840f is similar
Management port
iSCSI data port 2
iSCSI data port 1
FC data port 1
FC data port 2
16
SAS expansion
port (to JBOD)